STRIDE WIDE Runner Pieces 1″ deep

$259.00

Enter/Exit & Center Sections | Modular Shoe Sanitizing Mat System

EACH RUBBER BASE MAT W/INSERT INCLUDED IS $259. It takes 2 sections at $259 each to create the minimum size Runner Shoe Disinfecting Station. 1-34″ SaniClip comes with each 2 End Wide Runner sections ordered… additional Clips added for center sections. Sanitizer not included.

 

1 inch thick dark grey double sided insert included, 2-1/2 inch wide surround ramps & 1-1/16 inch total mat height

34″ Wide entry wet surface Sanitizer Mat | Build-to-Fit Length by adding Center pieces

The minimum size WIDE runner must consist of at least 2-end, enter/exit ramp sections at $259 each section as in the 2 piece image to the left… add center units to construct the WIDE modular system to your desired length. Add 2 additional enter/exit ramp sections per each additional location you want to place a system.

If you need assistance with configuring your WIDE Runner, please call 888.302.4857 (10am-3pm M-F) and we will assist you.

Order 1″ thick inserts here.

Quality American Craftsmanship

Fulfillment is 2-3 business days – ships UPS ground from the state of WA.

Note: Sanitizer solution not included – SaniStride does not sell or distribute sanitizers. Please see the Setup and Maintenance page for recommendations on sanitizer usage.  And be sure to question your chemical supplier regarding the efficacy of the sanitizer you are using.

Clear

Description

Modular Sanitary Mat System

LIMITED INVENTORY on the 1 inch deep Stride WIDE Shoe Sanitizer Runner components… some delays in fulfillment could be encountered. We will inform you immediately if there is a several day delay for Stride WIDE Runner production upon receiving your order.

Each base mat piece of the STRIDE-WIDE Runner is $259, insert included… as well as the hook and loop strips for holding sections together.

Build-to-Fit Sanitizer Mat

The STRIDE-WIDE RUNNER is a modular mat system to create a WIDE Shoe Sanitizer Runner Mat. The minimum size WIDE runner consists of 2 enter/exit end ramp sections with a 1″ wide, 1/2″ high strut between the 2 sections, held together with our new Sani-Clip, which has replaced the previous hook and loop system. The wet sanitizer surface is 2-sections of 18″L x 34″W, total 36″L x 34”W and allows easy sanitizing of cart wheels to cut down on the cross-contamination of germs. The ramp around the merged sections is 2.5″ wide creating an overall outside dimension of 42″L x 39″W. – 1” is added for each strut in the Runner System.

By adding WIDE CENTER sections L18″ x W34″ wet area, you can create a STRIDE-WIDE as long as desired… each additional section creates another 1″ wide 1/2″ high center strut. An additional Sani-Clip is provided for each additional center section added.

The Runner insert is a Sanistride® proprietary design. We suggest charging each 1″ Stride insert with 1-1.5 Gal maximum of sanitizer. Because of our proprietary insert design, there are no waves and little to no splashing making the SaniStride System one of the best sanitizing footbath mats on the market. 

The 1″ thick Low Profile insert is a Sanistride® proprietary design. We suggest charging each 1″ Stride insert with 1-1.5 Gal maximum of sanitizer.

Simple Sanitizer Mat Clean Up

Sanistride® mats have an easy clean-out protocol: Simply flush/rinse the insert and base-mat with clean water in a utility sink or with a hose. Stand or hang the insert on-end to drain the water quickly and drip dry overnight. If you desire to use the System 24/7, you will want to order a replacement insert with your initial order… it is needed for the cleaning rotation process as one will need to drip dry overnight. Please see the Setup and Maintenance page for more info.

(Please note: DO NOT put the insert in the EXTRACTOR, WASHER or DRYER as this will destroy the insert and its inner material.)