Description
34″ Wide Sanitizer Runner | Build-to-Fit Length
Please see the Stride LOW PROFILE (LP) Mat System 1/2″ deep product page for more info on the LP Mat.
We suggest charging each LP insert in the Runner System with 108-114 fluid ounces maximum of sanitizer.
Modular Sanitary Mat System
LIMITED INVENTORY on the 1/2 inch deep LOW PRO WIDE Shoe Sanitizer Runner components… some delays in fulfillment could be encountered. We will inform you immediately if there is a several day delay for LP Wide production upon receiving your order.
Each base-mat piece of the 1/2 inch deep Wide LP Runner System is $189.95, insert is included. Also included is a 34″ SaniClip for holding the sections together.
Build-to-Fit Sanitizer Mat
The LP Wide Runner is a modular mat system to create a WIDE and long Shoe Sanitizer Runner. The minimum size Wide runner consists of 2-end ramp sections with a 1″ wide, 1/2″ high strut between the 2 sections, held together with our new Sani-Clip, which has replaced the previous hook and loop system. The wet sanitizer surface is 2-sections of 18″L x 34″W equaling a total 36″L x 34”W wet surface. The ramp around the merged sections is 4″ wide. The outer dimension of the 2-piece wide is 46″L x 43″W. One inch is added in length for each strut you create by adding center sections to your LP runner configuration.
By adding WIDE CENTER sections ($189.95 ea) L18″ x W34″ wet area, you can create an LP Wide runner as long as desired… each additional section creates another 1″ wide 1/2″ high center strut. An additional Sani-Clip is provided for each additional center section added.
Please see close-up of Runner construction picture above.
Simple Sanitizer Mat Clean Up
Sanistride® mats have an easy clean-out protocol: Simply flush/rinse the insert and base-mat with clean water in a utility sink or with a hose. Stand or hang the insert on-end to drain the water quickly and drip dry overnight. If you desire to use the System 24/7, you will want to order a replacement insert with your initial order… it is needed for the cleaning rotation process as one will need to drip dry overnight. Please see the Setup and Maintenance page for more info.
(Please note: DO NOT put the insert in the EXTRACTOR, WASHER or DRYER as this will destroy the insert and its inner material.)