SaniStride slightly BLEMISHED 1/2″ Stride LOW PROFILE (LP) Mat System

$184.80

1/2 inch thick new insert included

The SaniStride® Stride LOW PROFILE Shoe and Boot Sanitizing Mat and cart wheel Disinfecting Mat System is comprised of a SBR rubber slightly blemished base mat with 1/2″ deep sanitizer well  with a new color trimmed dark blue carpet insert in place.

* 4″ wide surround ramps & 1/2″ total mat height – very easy on/off

The outer dimensions of the rubber base mat are 42″L x 27″

  • The inner dimensions (wet sanitizer surface / insert) are 34″ L x 18″ W x 1/2″ Deep
  • Weight of the LOW PROFILE System is 13 lbs

Fulfillment is 2-3 days – ships UPS ground from the state of WA.

Note: Sanitizer solution not included SaniStride does not sell or distribute sanitizers. Please see the Setup and Maintenance page for recommendations on sanitizer usage. And be sure to question your chemical supplier regarding the efficacy of the sanitizer you are using.

Clear

Description

The SaniStride® 1/2″ deep Stride Low Pro BLEMISHED mat allows you to take 2 steps while crossing the mat… “Two Steps Closer to Reducing the Spread of Germs®” – The SaniStride STRIDE Mat – for industrial/commercial applications and heavy foot-traffic.

The SaniStride® Shoe Sanitizer Mat is an effective germ killing delivery system when used as directed for:
Hospital/Lab & Health Care Clinics, Food Processing, Farm & Agriculture, Sports Facilities & Locker Rooms, Aquarium, High Technology, Veterinary, Emergency Medical & Fire Service, Law Enforcement and many other applications.

The Stride LP 1/2″ thick insert is a Sanistride® proprietary design. We suggest charging the 1/2″ Stride LP insert with 114oz maximum of sanitizer. As per your clean out protocol simply flush/rinse the insert and base-mat with lots of clean water in a utility sink or with a hose. You must then stand or hang the insert on-end to drain the water quickly and drip dry overnight. DO NOT put the insert in the EXTRACTOR, WASHER or DRYER as this will DESTROY the insert and its inner material. If you desire to use the System 24/7, you will want to order a replacement insert with your initial order… it is needed for the cleaning rotation process as one will need to drip dry overnight. Please see the Setup and Maintenance page for more info.