Description
Shoe Sanitizing Door Mat – LOW PRO 1/2″ Thick Insert for shoe and boot sanitizing in the SaniStride® Low Profile rubber base mat.
The 1/2″ thick Low Pro replacement insert is a Sanistride® proprietary design. The double-sided LP insert is constructed of extremely durable indoor/outdoor carpet and is available with a red, yellow or blue trim. The 1/2″ thick LP insert is a Sanistride® proprietary design constructed to have the same effect as a sponge. It holds the shoe sanitizer added by the customer within ready to inject it into the shoe treads and crevices when stepped on. SaniStride® Mat Systems perform best on level surfaces. However, on surfaces that are not quite level, the SaniStride® insert can keep the liquid from pooling on the down-hill side of the mat due to its very absorbent quality.
Size – 34″L x 18″W x 1/2″H – weight dry is 2 lbs. (NOT for use in the Stride 1″ deep systems).
We suggest charging the LP insert with 108-114 fluid ounces maximum of sanitizer.
To clean – flush with plenty of clean water in a utility sink or tub. If available hose off outside and stand on its side or hang to drip dry overnight.
If you plan on using the Low Profile system 24/7, you will want a replacement Shoe Sanitizing Door Mat Insert to put into service while the original that came with your mat is being cleaned and set on edge or hung to air-dry overnight. Inserts should be replaced when both carpeted surfaces develop rolls/waves and flatten out and deeper puddling and splashing is evident. Depending on the daily amount of foot traffic and cleaning protocol, the insert life is 6 months to a year plus.
Please note: DO NOT put the insert in the EXTRACTOR, WASHER or DRYER as this will destroy the insert and its inner material.
Sanitizer solution not included – SaniStride does not sell or distribute sanitizers. Please see the Setup and Maintenance page for recommendations on sanitizer usage. And be sure to question your chemical supplier regarding the efficacy of the sanitizer you are using. A company by the name of Zogics sells an effective and inexpensive concentrated sanitizer that mixes with water called HDIS128.
Sorry, ALL SALES FINAL, NO RETURNS… Due to the possibility of contamination as a result of customer receiving, testing and re-shipping, SaniStride® does not accept returns and does not offer refunds. However, you can cancel an order within 24 hours of ordering.
Simple Sanitizer Mat Clean Up
Sanistride® mats have an easy clean-out protocol: Simply flush/rinse the Shoe Sanitizing Door Mat Insert and base-mat with clean water in a utility sink or with a hose. Stand or hang the insert on end to drain the water quickly and drip dry overnight. If you desire to use the System 24/7, you will want to order a replacement insert with your initial order… it is needed for the cleaning rotation process as one will need to drip dry overnight. Please see the Setup and Maintenance page for more info.
TO ASSURE THAT YOU ARE MAXIMIZING THE BIOSECURITY of your SaniStride® Mat System and your facility, the mat INSERT must be monitored for the possible build-up of CONTAMINATION of bio-materials and other debris. SaniStride® recommends the replacement of inserts within 6 months of use to assist in protecting against possible contamination build-up within the SaniStride® system.
Article – Shoe/boot washers, sanitizers… is important that they be cleaned out or reset regularly.
