Description
Low Profile 2-Piece LONG Runner 1/2″ Deep Shoe Sanitizer Mat Runners – The Low Profile 1/2″ height with 4″ wide surround ramps meets ADA Specifications.
Because the SaniStride Low Profile 1/2″ deep Shoe Sanitizing System meets ADA specifications, it has many PUBLIC facility applications such as; entries and internal passageways at hospitals, clinics, schools, Gyms, senior residences, apartment buildings, homes and many more. Easy on-off crossovers for foot traffic, wheelchairs, and cart wheel sanitizing.
Please be advised that for some heavy industrial and commercial uses especially in food production, our original Stride 1″ deep base-mat with a 1” thick insert included might be better suited than the Low Pro 1/2″ deep mat.
2-PIECE LONG RUNNER – DIMENSIONS
The outer dimensions when clipped together are 78″L x 27″W x 1/2″H
The inner dimensions (wet sanitizer surface/insert) are 68″ L x 18″ W x 1/2″ Deep
The overall weight of the 3 pieces with dry inserts equals 24 Lbs.
Fill EACH section with 108-114 fluid ounces (3.4 – 3.5 quarts) of disinfectant of your choice… a concentrated Quaternary disinfectant that you mix with water at the manufacturer’s dilution rate is suggested and cost-effective. Please do not use chlorine bleach as it will damage the system and void the 3-year warranty on the rubber base mat.
Because of our proprietary insert design, there are no waves and little to no splashing… a very effective shoe sanitizer delivery system without the mess of the open puddle boot dip mats. The 1/2″ thick LP insert is a Sanistride® proprietary design constructed to have the same effect as a sponge. It holds the shoe sanitizer within ready to inject it into the shoe treads and crevices when stepped on.
Note: Sanitizer solution not included – SaniStride does not sell or distribute sanitizers. Please see the Setup and Maintenance page for recommendations on sanitizer usage. And be sure to question your chemical supplier regarding the efficacy of the sanitizer you are choosing to use… that information will determine how often the solution needs to be replaced to be effective at killing germs on shoes. A company by the name of Zogics sells an effective and inexpensive concentrated sanitizer that mixes with water called HDIS128.
At just a 1/2” in height and with 4” wide surround ramps, the Low Profile Shoe Sanitizer Mat Runners were specifically designed for the ease of entry and exit of shoe sanitizer users. The low mat height and long width of the ramps are extremely beneficial for easy entry and exit while pushing a heavily laden cart across it to disinfect the cart wheels as well as the worker’s shoes.
Sorry, ALL SALES FINAL, NO RETURNS… Due to the possibility of contamination as a result of customer receiving, testing and re-shipping, SaniStride® does not accept returns and does not offer refunds. However, you can cancel your order within 24 hours.
Simple Sanitizer Mat Clean Up
Sanistride® mats have an easy clean-out protocol: Simply flush/rinse the insert and base-mat with clean water in a utility sink or with a hose. Stand or hang the insert on end to drain the water quickly and drip dry overnight. If you desire to use the System 24/7, you will want to order a replacement insert with your initial order… it is needed for the cleaning rotation process as one will need to drip dry overnight. Please see the Setup and Maintenance page for more info.
TO ASSURE THAT YOU ARE MAXIMIZING THE BIOSECURITY of your SaniStride® Mat System and your facility, the mat INSERT must be monitored for the possible build-up of CONTAMINATION of bio-materials and other debris. SaniStride® recommends the replacement of inserts within 6 months of use to assist in protecting against possible contamination build-up within the SaniStride® system.
Article – Shoe/boot washers, sanitizers… is important that they be cleaned out or reset regularly.
Please note: DO NOT put the insert in the EXTRACTOR, WASHER or DRYER as this will destroy the insert and its inner material.
